ACS712ELCTR-20A-T 电流传感器 ACS712T-ShenZhen Ronghua Technology co., LTD

Position: Home > News & Events > Industry News > View News

ACS712ELCTR-20A-T

Update: 2012-10-26 14:03:44, Hits: 1668

ACS712: Fully Integrated, Hall-Effect-Based Linear Current Sensor IC with 2.1 kVRMS Voltage Isolation and a Low-Resistance Current Conductor

The Allegro? ACS712 provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection. The device is not intended for automotive applications. For the automotive grade version, see ACS714.

The device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.

The output of the device has a positive slope (>VIOUT(Q)) when an increasing current flows through the primary copper conduction path (from pins 1 and 2, to pins 3 and 4), which is the path used for current sensing. The internal resistance of this conductive path is 1.2 mΩ typical, providing low power loss. The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor IC leads (pins 5 through 8). This allows the ACS712 current sensor IC to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.

The ACS712 is provided in a small, surface mount SOIC8 package. The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb-based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.

FEATURES & BENEFITS

Low-noise analog signal path
Device bandwidth is set via the new FILTER pin
5 μs output rise time in response to step input current
80 kHz bandwidth
Total output error 1.5% at TA = 25°C
Small footprint, low-profile SOIC8 package
1.2 mΩ internal conductor resistance
2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
5.0 V, single supply operation
66 to 185 mV/A output sensitivity
Output voltage proportional to AC or DC currents
Factory-trimmed for accuracy
Extremely stable output offset voltage
Nearly zero magnetic hysteresis
Ratiometric output from supply voltage

Functional Block Diagram

PACKAGING

The ACS712 is provided in a small, surface mount SOIC8 package (suffix LC). The leadframe is plated with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device is Pb-free, except for flip-chip high-temperature Pb-based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.

Part Number Specifications and Availability

Part Number             Package Type           Temperature
ACS712ELCTR-05B-T         8-lead SOIC          -40 ° C to 85 ° C
ACS712ELCTR-20A-T         8-lead SOIC          -40 ° C to 85 ° C
ACS712ELCTR-30A-T         8-lead SOIC          -40 ° C to 85 ° C
ASEK712ELC-05B-T          DEMO BOARD           -40 ° C to 85 ° C
ASEK712ELC-20A-T          DEMO BOARD           -40 ° C to 85 ° C
ASEK712ELC-30A-T          DEMO BOARD           -40 ° C to 85 ° C

YXF INTERNATIONAL (HK) CO., LIMITED

Contact Person: Nina Huang
Mobile phone: 086-13590206596
QQ： 1814944264
MSN/E-mail : zoe_hxe@hotmail.com

www.yxfic.com www.yxfic.net www.yuanxinfeng.com

Top Hot Optocoupler：
LTV-247 LITEON    Toahiba TLP281-4GB
LTV-846 LITEON    Toahiba TLP521-4GB
LTV-816 LITEON    Toahiba TLP521-1GB
LTV356T-B LITEON   Toahiba TLP181GB

Top Hot components：
LTV817STA-V 6N137S A6801SLW
ACS710KLATR-12CB-T ACS758KCB-150B-PFF ACS758LCB-100B-PFF
ACS758LCB-050B-PFF ACS758ECB-200B-PFF ACS710KLATR-25CB-T
ACS712ELCTR-20A-T ACS712ELCTR-05B-T ACS712ELCTR-30A-T
LTV-816S-C-TA LTV-816S-B-TA LTV-816S-A-TA
LTV356T-C A3955SB A3987SLP-T
TB62209FG A3212EUA OV529-B49
A3212ELHLT A1104EUA 6N137S
US1881KUA A3977SED TOP246YN HG-106C HG-106A
A3901SEJTR-T MC33039DR TLE4921-5U
TLE4935L TLE4913 TB6560AHQ A4988 A4988SET A4988SETTR-T
THB6128 THB7128 A1326LUA A1326 TB62209FG
Camera Module OV7670 OV7740 OV7725 OV9653 OV9655 OV2640 OV3640
The camera module 300,000 pixels 1,300,000 pixels 2,000,000 pixels 3,200,000 pixels
Hall element, motor driver chips, current sensor, integrated circuit,microcontroller, capacitors, resistors, inductors, diodes, transistors,beads, crystal, connectors, connector, buzzer, our professional supportingfactory

Top Hot Optocoupler：
LTV-247          LITEON代用Toahiba   TLP281-4GB
LTV-846          LITEON代用Toahiba   TLP521-4GB
LTV-816          LITEON代用Toahiba   TLP521-1GB
LTV356T-B        LITEON代用Toahiba   TLP181GB

ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T ACS712T

ACS712ELC ACS712ELCTR-20A ACS712ELCTR-20A-T ACS712ELC-20A

ACS712ELC ACS712ELCTR-30A ACS712ELCTR-30A-T ACS712ELC-30A

ACS712ELC ACS712ELCTR-05B ACS712ELCTR-05B-T ACS712ELC-05B

Others

Pre: A1326LUA-T Linear Hall Effect Sensor IC

Next: TLE4921-5U HALL EFFECT SENSOR